Reviewed-on: #2
BeatGlow
Visualizer for audiophile streamers (or enthousiasts alike).
State of the project
Work in progress!
Features
Main display
Showing what track is currently playing.
Features:
- Audio format, bitrate and output sample rate display
- Track elapsed and duration
- Track album art
- Spectrum analyzer / Waterfall display of the track playing
Mono spectrum analyzer (also supports stereo):
Stereo spectrum waterfall display (also supports mono):
Settings
Live adjust settings from the rotary dail.
Spectrum analyzer
Shader
Performance
Tests have been performed on a Raspberry Pi 4B+ with 4GB RAM, with a 256x64x4 pixel display running at 25 frames per second. Lowering the frame rate also lowers resource utilisation at the expensive of less fluid animations.
CPU usage
During the main display with stereo spectrum analyzer, running 44.1kHz stereo audio: 9% CPU, 20MB RAM.
During the full screen stereo spectrum analyzer, running 44.1kHz stereo audio: 10% CPU, 20MB RAM.
During the shader, running various shader effects, running 44.1kHz stereo audio: 40-50% CPU, 21MB RAM.
Setup
Minimal requirements:
- Linux Computer (Raspberry Pi 3B+)
- Supported display
Setup Raspberry Pi & SSD1322 256x64 OLED display
Requirements:
- Raspberry Pi 3B+/4B+
- SSD1322 OLED Display 3.12" 256x64
- Display purchase options:
Wiring
Wiring the display is as follows, looking at the OLED display connector from the back (pin 1 on the top left, pin 16 on the bottom right):
Configuration
The display configuration in beatglow.conf is as follows:
# Display hardware configuration.
display {
# Target frame rate, actual frame rate depends on hardware options.
fps = 25
# Main display is where all the magic happens.
main {
# Type of display
type = "ssd1322"
size = "256x64"
# Mode (spi or i2c)
mode = "spi"
# SPI settings
port = "spi0.0"
reset = "GPIO25"
dc = "GPIO24"
bl = "GPIO23"
}
}
Setup Raspberry Pi & ST7789 170x320 IPS display
Requirements:
- Raspberry Pi 3B+/4B+
- ST7735/ST8889 IPS display
- Display purchase options:
Configuration
The display configuration in beatglow.conf is as follows:
display {
# Target frame rate, actual frame rate depends on hardware options.
fps = 25
# Main display is where all the magic happens.
main {
# Type of display
type = "st7789" # or st7735
size = "320x130"
rotate = "left"
# Mode (spi or i2c)
mode = "spi"
# SPI settings
port = "spi0.0"
reset = "GPIO25"
dc = "GPIO24"
bl = "GPIO23"
}
}
-
Affiliate links, by clicking them and making an order there is a small kick back for me, which allows me to order parts for testing. There is usually no additional costs for the purchaser. ↩︎














