2026-10-29 17:30:03 +01:00
2026-10-29 17:29:54 +01:00
2026-10-29 17:29:41 +01:00
2026-10-29 17:29:41 +01:00
2026-10-29 17:29:54 +01:00
2026-10-29 17:29:41 +01:00
2026-10-29 17:29:54 +01:00
2026-10-29 17:29:54 +01:00
2026-10-29 17:30:03 +01:00
2026-10-29 17:29:54 +01:00
2026-10-29 17:29:41 +01:00
2026-10-29 17:26:07 +01:00
2026-10-29 17:29:54 +01:00
2026-10-29 17:30:03 +01:00
2026-10-29 17:29:41 +01:00

BeatGlow

Visualizer for audiophile streamers (or enthousiasts alike).

State of the project

Work in progress!

Features

Main display

Showing what track is currently playing.

Features:

  • Audio format, bitrate and output sample rate display
  • Track elapsed and duration
  • Track album art
  • Spectrum analyzer / Waterfall display of the track playing

BeatGlow main display

Settings

Live adjust settings from the rotary dail.

BeatGlow settings display

Setup

Minimal requirements:

  • Linux Computer (Raspberry Pi 3B+)
  • Supported display

Setup Raspberry Pi & SSD1322 256x64 OLED display

Requirements:

Wiring

Wiring the display is as follows, looking at the OLED display connector from the back (pin 1 on the top left, pin 16 on the bottom right):

SSD1322 setup

Wire Function Raspberry Pi Display
Ground Pin 20 (GND) Pin 1
3.3V Pin 17 (3.3V) Pin 2
SPI Clock Pin 23 (GPIO11) Pin 4
SPI Data Pin 19 (GPIO10) Pin 5
SPI D/C Pin 18 (GPIO24) Pin 14
SPI Reset Pin 22 (GPIO25) Pin 15
SPI C/E Pin 24 (GPIO8) Pin 16

Configuration

The display configuration in beatglow.conf is as follows:

# Display hardware configuration.
display {
    # Target frame rate, actual frame rate depends on hardware options.
    fps = 25

    # Main display is where all the magic happens.
    main {
        # Type of display
        type  = "ssd1322"
        size  = "256x64"

        # Mode (spi or i2c)
        mode  = "spi"

        # SPI settings
        port  = "spi0.0"
        reset = "GPIO25"
        dc    = "GPIO24"
        bl    = "GPIO23"
    }
}

Setup Raspberry Pi & ST7789 170x320 IPS display

Requirements:

Configuration

The display configuration in beatglow.conf is as follows:


display {
    # Target frame rate, actual frame rate depends on hardware options.
    fps = 25

    # Main display is where all the magic happens.
    main {
        # Type of display
        type   = "st7789"  # or st7735
        size   = "320x130"
        rotate = "left"

        # Mode (spi or i2c)
        mode  = "spi"

        # SPI settings
        port  = "spi0.0"
        reset = "GPIO25"
        dc    = "GPIO24"
        bl    = "GPIO23"
    }
}

  1. Affiliate links, by clicking them and making an order there is a small kick back for me, which allows me to order parts for testing. There is usually no additional costs for the purchaser. ↩︎

S
Description
BeatGlow is a music visualiser for embedded audio players
Readme MIT
125 MiB
0 Stars 1 Watchers 0 Forks
Languages
Go 100%