Commit Graph

50 Commits

Author SHA1 Message Date
Ilya Zhuravlev
d6e95213e3 Merge remote-tracking branch 'qmk/master' into merge-2023-06-03 2023-06-03 12:35:25 -06:00
Ryan
4871f651c5
Move remaining LAYOUT_alls to data driven (#20463) 2023-04-27 07:45:43 +10:00
Ilya Zhuravlev
2ec3ba62cd fix renamed keycodes 2023-03-19 12:05:44 -06:00
Ilya Zhuravlev
06a2fdcc9c Merge remote-tracking branch 'qmk/master' into merge-2023-03-12 2023-03-18 17:51:58 -06:00
Ryan
d8aec71e48
Remove trailing zeroes in info.json layouts (#20156) 2023-03-17 14:21:53 +00:00
Ryan
23c365b023
Move matrix config to info.json, part 1 (#19985) 2023-03-05 22:53:52 +00:00
Ryan
2da0827d4f
Remove matrix size defines (#19581) 2023-02-17 16:08:25 +11:00
Ryan
f9aeea64c1
Migrate MCU and BOOTLOADER to data-driven (#19529) 2023-02-08 18:41:46 +11:00
Ryan
ebb512db82
Debounce defines cleanup (#19742)
* Clean up `DEBOUNCE` in config.h, 0-9

* Clean up `DEBOUNCE` in config.h, A

* Clean up `DEBOUNCE` in config.h, B

* Clean up `DEBOUNCE` in config.h, C

* Clean up `DEBOUNCE` in config.h, D

* Clean up `DEBOUNCE` in config.h, E

* Clean up `DEBOUNCE` in config.h, F

* Clean up `DEBOUNCE` in config.h, G

* Clean up `DEBOUNCE` in config.h, H

* Clean up `DEBOUNCE` in config.h, handwired

* Clean up `DEBOUNCE` in config.h, I

* Clean up `DEBOUNCE` in config.h, J

* Clean up `DEBOUNCE` in config.h, K

* Clean up `DEBOUNCE` in config.h, L

* Clean up `DEBOUNCE` in config.h, M

* Clean up `DEBOUNCE` in config.h, N

* Clean up `DEBOUNCE` in config.h, O

* Clean up `DEBOUNCE` in config.h, P

* Clean up `DEBOUNCE` in config.h, Q

* Clean up `DEBOUNCE` in config.h, R

* Clean up `DEBOUNCE` in config.h, S

* Clean up `DEBOUNCE` in config.h, T

* Clean up `DEBOUNCE` in config.h, U

* Clean up `DEBOUNCE` in config.h, V

* Clean up `DEBOUNCE` in config.h, W

* Clean up `DEBOUNCE` in config.h, X

* Clean up `DEBOUNCE` in config.h, Y

* Clean up `DEBOUNCE` in config.h, Z

* Remove default debounce from info.json

* Migrate non-default debounce to info.json
2023-02-03 19:19:58 +00:00
Ryan
f20a05440e
Remove unused MATRIX_HAS_GHOST from config.h (#19726) 2023-02-03 00:04:10 +00:00
Ryan
b867522f8c
Clean up Force NKRO in config.h (#19718) 2023-01-30 20:45:41 +00:00
Nick Brassel
f6dd8dea2e
Remove usages of config_common.h from config.h files. (#19714) 2023-01-31 06:03:30 +11:00
Ryan
1cb1a5a374
Remove legacy Grave Escape keycodes (#18787) 2022-10-20 18:04:11 -07:00
jack
de2c81d5b2
Remove all BACKLIGHT_LEVELS 0 (#18630) 2022-10-07 09:07:56 +01:00
Ilya Zhuravlev
d4fa6703b8 Merge remote-tracking branch 'qmk/master' into merge-2022-09-10 2022-09-10 04:10:44 -06:00
Joel Challis
bbc3bc55f2
RESET -> QK_BOOT user keymaps (#17940) 2022-08-21 23:55:30 +01:00
Nick Brassel
154d35ac14
Remove UNUSED_PINS (#17931) 2022-08-06 23:23:35 +10:00
Ryan
bcb8600a31
Move keyboard USB IDs and strings to data driven: I (#17836) 2022-07-29 13:40:16 +01:00
Ilya Zhuravlev
fde0c10bae Merge remote-tracking branch 'qmk/master' into merge-2022-07-11 2022-07-11 18:40:32 -06:00
Joel Challis
b7771ec25b
RESET -> QK_BOOT default keymaps (#17037) 2022-05-15 20:26:27 +01:00
Ilya Zhuravlev
eb9b8121d3 disable key override for several keyboards to fix build 2022-04-05 00:13:01 -06:00
Ryan
764dc18a81
Remove NO_ACTION_MACRO and NO_ACTION_FUNCTION from keyboard config.h (#16655) 2022-03-15 13:56:58 +00:00
Ilya Zhuravlev
3a3c93383f Merge remote-tracking branch 'qmk/master' into merge-2022-03-06 2022-03-06 20:07:17 -06:00
Ryan
f718a10889
Fix up build options comments (#15463) 2021-12-12 18:05:37 -08:00
Ilya Zhuravlev
88bf44797d Sync keyboards with qmk, switch via->vial keymap where applicable 2021-12-11 22:28:13 -05:00
Ilya Zhuravlev
f0ae3fb701 Merge remote-tracking branch 'qmk/master' into merge-2021-12-11 2021-12-11 20:19:52 -05:00
Ryan
a8d440e4e0
Tidy up NKRO_ENABLE rules (#15382) 2021-12-09 16:05:44 +11:00
Ryan
c12b997679
Tidy up SLEEP_LED_ENABLE rules (#15362) 2021-12-01 21:13:00 +11:00
QMK Bot
7ef13e8fef Merge remote-tracking branch 'origin/master' into develop 2021-11-06 18:53:20 +00:00
James Young
0b89fa3324
idb 60 Layout Macro Refactor (#15079)
* alias LAYOUT to LAYOUT_all

* move layout alias to info.json

* use XXX for KC_NO in idb_60.h

* remove newline characters from info.json labels

* put LAYOUT_all data first in info.json

Matches the order of idb_60.h.

* friendly-format info.json

* add matrix diagram to idb_60.h

* rename LAYOUT_default to LAYOUT_60_ansi_wkl_split_rshift

* add LAYOUT_60_tsangan_hhkb

* add LAYOUT_60_ansi_tsangan

* add LAYOUT_60_iso_tsangan

* add LAYOUT_60_iso_wkl_split_rshift

* add LAYOUT_60_iso_tsangan_hhkb

* edit Backspace label for LAYOUT_60_ansi_wkl_split_rshift

* use GitHub username in info.json maintainer field
2021-11-06 11:52:31 -07:00
James Young
84ea77ead6
Remove BOOTMAGIC_ENABLE = lite option (#15002)
* remove BOOTMAGIC_ENABLE=lite setting

* change keyboard BOOTMAGIC_ENABLE rules

Edits keyboard-level instances of `BOOTMAGIC_ENABLE = lite` to `BOOTMAGIC_ENABLE = yes`.

* change keyboard BOOTMAGIC_ENABLE inline comments

Edits keyboard-level BOOTMAGIC_ENABLE inline comments to "Enable Bootmagic Lite".

* change keymap BOOTMAGIC_ENABLE rules

Edits keymap-level instances of `BOOTMAGIC_ENABLE = lite` to `BOOTMAGIC_ENABLE = yes`.

* change keymap BOOTMAGIC_ENABLE inline comments

Edits/adds keymap-level BOOTMAGIC_ENABLE inline comments to read "Enable Bootmagic Lite".

* change layout/user BOOTMAGIC_ENABLE rules/comments

Edits instances of `BOOTMAGIC_ENABLE = lite` to `BOOTMAGIC_ENABLE = yes`.

Edits/adds keymap-level BOOTMAGIC_ENABLE inline comments to read "Enable Bootmagic Lite".

* update non-rules.mk BOOTMAGIC_ENABLE references in keyboards/

* remove docs references to Full Bootmagic

* convert data-driven Bootmagic Lite instances

* remove Bootmagic Lite bodge from data-driven generation

* Merge remote-tracking branch 'upstream/develop' into rm/bootmagic-full_q4a

* update docs/ja/config_options.md per mtei

* update docs/faq_misc.md per mtei

Remove remaining Full Bootmagic reference.
2021-11-05 08:18:09 +11:00
Drashna Jaelre
028edfc2df
Remove unused KEYBOARD_LOCK_ENABLE from rules (#14920) 2021-10-25 21:14:46 -07:00
James Young
6f36eb469d
Remove unused IS_COMMAND() instances and Magic Key definitions (#14610)
* Remove unused IS_COMMAND() instances from keyboard-level config.h, 0-9

* Remove unused IS_COMMAND() instances from keyboard-level config.h, A-B

* Remove unused IS_COMMAND() instances from keyboard-level config.h, C-D

* Remove unused IS_COMMAND() instances from keyboard-level config.h, E-G

* Remove unused IS_COMMAND() instances from keyboard-level config.h, handwired

* Remove unused IS_COMMAND() instances from keyboard-level config.h, H-M

* Remove unused IS_COMMAND() instances from keyboard-level config.h, N-R

* Remove unused IS_COMMAND() instances from keyboard-level config.h, S-Z

* Remove unused Magic Key definitions from keyboard-level config.h, 0-9

* Remove unused Magic Key definitions from keyboard-level config.h, A

* Remove unused Magic Key definitions from keyboard-level config.h, B

* Remove unused Magic Key definitions from keyboard-level config.h, C

* Remove unused Magic Key definitions from keyboard-level config.h, D-E

* Remove unused Magic Key definitions from keyboard-level config.h, F-H

* Remove unused Magic Key definitions from keyboard-level config.h, handwired

* Remove unused Magic Key definitions from keyboard-level config.h, I-K

* Remove unused Magic Key definitions from keyboard-level config.h, L-M

* Remove unused Magic Key definitions from keyboard-level config.h, N-R

* Remove unused Magic Key definitions from keyboard-level config.h, S-V

* Remove unused Magic Key definitions from keyboard-level config.h, W-Z

* Merge remote-tracking branch 'upstream/master' into clean/command_and_magic

* Remove remaining unused IS_COMMAND() instances from keyboard-level config.h
2021-09-26 02:57:20 -07:00
Ilya Zhuravlev
cf548ab9e6 Merge branch 'qmk-pre-merge-2021-09-12' into qmk-merge-2021-09-12 2021-09-12 14:08:31 -04:00
Ryan
5af1799735
Remove BLUETOOTH_ENABLE from keyboard-level rules.mk (#14379) 2021-09-12 15:27:29 +10:00
Ryan
4791cfae1a
Remove width, height and key_count from info.json (#14274) 2021-09-12 14:04:56 +10:00
Ryan
7eea780a7d
Remove bootloader listings from rules.mk (#14330) 2021-09-10 13:35:46 +10:00
James Young
a03aa301de
Remove Full Bootmagic (#13846)
* disambiguate Bootmagic rules in keymaps

The files edited by this commit were added at a point in time where `BOOTMAGIC_ENABLE = yes` enabled full Bootmagic.

This commit edits the files to specify that full Bootmagic is intended.

* remove BOOTMAGIC_ENABLE=full setting

* unify commented BOOTMAGIC_ENABLE rules in keyboards

Explicitly sets `BOOTMAGIC_ENABLE = no` in keyboards where the rule was commented out.

Command:

```
find keyboards/ -type f -name 'rules.mk' -and -not -path '*/keymaps/*' -exec sed -i -e 's;#[ \t]*\(BOOTMAGIC_ENABLE\)[ \t=]\+\([a-zA-Z]\+\).*;\1 = no       # Virtual DIP switch configuration;g' {} +
```

* remove commented Bootmagic rules from keymap/user level

Command:

```
find keyboards/ layouts/ users/ -type f -name 'rules.mk' -exec sed -i -e '/#.*\(BOOTMAGIC_ENABLE\)[ \t=]\+\([a-z]\+\).*/d' {} +
```

* update keyboard BOOTMAGIC_ENABLE rule formatting

Sets the formatting of BOOTMAGIC_ENABLE rules to `BOOTMAGIC_ENABLE = [value]`, without the inline comments (which will be replaced later).

Command:

```
find keyboards/ -type f -name 'rules.mk' -and -not -path '*/keymaps/*' -exec sed -i -e 's;\(BOOTMAGIC_ENABLE\)[ \t=]\+\([a-z]\+\).*;\1 = \2;g' '{}' +
```

* update keyboards' BOOTMAGIC_ENABLE settings

Updates keyboard `rules.mk` files to use `BOOTMAGIC_ENABLE = lite` where `BOOTMAGIC_ENABLE = full` was being used.

Command:

```
find keyboards/ -type f -name 'rules.mk' -and -not -path '*/keymaps/*' -exec sed -i -e 's;\(BOOTMAGIC_ENABLE = \)full;\1lite;g' '{}' +
```

* update keymap/user BOOTMAGIC_ENABLE settings

Updates keymap/user `rules.mk` files to use `BOOTMAGIC_ENABLE = lite` where `BOOTMAGIC_ENABLE = full` was being used.

Commands:

```
find keyboards/ -type f -name 'rules.mk' -and -path '*/keymaps/*' -exec sed -i -e 's;\(BOOTMAGIC_ENABLE[ \t=]\+\)full;\1lite;g' '{}' +
find layouts/community/ users/ -type f -name 'rules.mk' -exec sed -i -e 's;\(BOOTMAGIC_ENABLE[ \t=]\+\)full;\1lite;g' '{}' +
```

* remove and replace inline comments in keyboards and keymap/user files

Removes and replaces the inline comments, which have been updated to read `Enable Bootmagic Lite`.

Commands:

```
find keyboards/ -type f -name 'rules.mk' -and -path '*/keymaps/*' -exec sed -i -e 's;\(BOOTMAGIC_ENABLE\)[ \t=]\+\([a-z]\+\).*;\1 = \2;g' '{}' +
find layouts/community/ users/ -type f -name 'rules.mk' -exec sed -i -e 's;\(BOOTMAGIC_ENABLE\)[ \t=]\+\([a-z]\+\).*;\1 = \2;g' '{}' +
find keyboards/ layouts/community/ users/ -type f -name 'rules.mk' -exec sed -i -e 's;\(BOOTMAGIC_ENABLE = lite\);\1     # Enable Bootmagic Lite;g' '{}' +
find keyboards/ layouts/community/ users/ -type f -name 'rules.mk' -exec sed -i -e 's;\(BOOTMAGIC_ENABLE = yes\);\1      # Enable Bootmagic Lite;g' '{}' +
find keyboards/ layouts/community/ users/ -type f -name 'rules.mk' -exec sed -i -e 's;\(BOOTMAGIC_ENABLE = no\);\1       # Enable Bootmagic Lite;g' '{}' +
```

* rename improperly named makefiles

Some files intended to be used as makefiles had improper names causing them to not be used as intended when building.

This commit corrects the filenames of the affected files.

* update renamed file with new rule formatting

* update QMK's template files

Updates QMK's `rules.mk` templates to use the new inline comment.

* update QMK Docs

- remove documentation of full Bootmagic
- update links to Bootmagic Lite doc
- add doc for Magic Keycodes

* rules.mk patch for coarse/ixora and coarse/vinta
2021-08-06 23:59:56 -07:00
Ilya Zhuravlev
a89c941828 Merge remote-tracking branch 'qmk/master' into vial 2021-06-26 16:11:57 -04:00
James Young
1646c0f26c
2021 May 29 Breaking Changes Update (#13034)
* Add Per Key functionality for AutoShift (#11536)

* LED Matrix: Reactive effect buffers & advanced indicators (#12588)

* [Keyboard] kint36: switch to sym_eager_pk debouncing (#12626)

* [Keyboard] kint2pp: reduce input latency by ≈10ms (#12625)

* LED Matrix: Split (#12633)

* [CI] Format code according to conventions (#12650)

* feat: infinite timeout for leader key (#6580)

* feat: implement leader_no_timeout logic

* docs(leader_key): infinite leader timeout docs

* Format code according to conventions (#12680)

* Update ADC driver for STM32F1xx, STM32F3xx, STM32F4xx (#12403)

* Fix default ADC_RESOLUTION for ADCv3 (and ADCv4)

Recent ChibiOS update removed ADC_CFGR1_RES_10BIT from the ADCv3 headers
(that macro should not have been there, because ADCv3 has CFGR instead of
CFGR1).  Fix the default value for ADC_RESOLUTION to use ADC_CFGR_RES_10BITS
if it is defined (that name is used for ADCv3 and ADCv4).

* Update ADC docs to match the actually used resolution

ADC driver for ChibiOS actually uses the 10-bit resolution by default
(probably to match AVR); fix the documentation accordingly.  Also add
both ADC_CFGR_RES_10BITS and ADC_CFGR1_RES_10BIT constants (these names
differ according to the ADC implementation in the particular MCU).

* Fix pinToMux() for B12 and B13 on STM32F3xx

Testing on STM32F303CCT6 revealed that the ADC mux values for B12 and
B13 pins were wrong.

* Add support for all possible analog pins on STM32F1xx

Added ADC mux values for pins A0...A7, B0, B1, C0...C5 on STM32F1xx
(they are the same at least for STM32F103x8 and larger F103 devices, and
also F102, F105, F107 families).  Actually tested on STM32F103C8T6
(therefore pins C0...C5 were not tested).

Pins F6...F10, which are present on STM32F103x[C-G] in 144-pin packages,
cannot be supported at the moment, because those pins are connected only
to ADC3, but the ChibiOS ADC driver for STM32F1xx supports only ADC1.

* Add support for all possible analog pins on STM32F4xx

Added ADC mux values for pins A0...A7, B0, B1, C0...C5 and optionally
F3...F10 (if STM32_ADC_USE_ADC3 is enabled).  These mux values are
apparently the same for all F4xx devices, except some smaller devices may
not have ADC3.

Actually tested on STM32F401CCU6, STM32F401CEU6, STM32F411CEU6 (using
various WeAct “Blackpill” boards); only pins A0...A7, B0, B1 were tested.

Pins F3...F10 are inside `#if STM32_ADC_USE_ADC3` because some devices
which don't have ADC3 also don't have the GPIOF port, therefore the code
which refers to Fx pins does not compile.

* Fix STM32F3xx ADC mux table in documentation

The ADC driver documentation had some errors in the mux table for STM32F3xx.
Fix this table to match the datasheet and the actual code (mux settings for
B12 and B13 were also tested on a real STM32F303CCT6 chip).

* Add STM32F1xx ADC pins to the documentation

* Add STM32F4xx ADC pins to the documentation

* Add initial support for tinyuf2 bootloader (when hosted on F411 blackpill) (#12600)

* Add support for jumping to tinyuf2 bootloader. Adds blackpill UF2 example.

* Update flashing.md

* Update chconf.h

* Update config.h

* Update halconf.h

* Update mcuconf.h

* eeprom driver: Refactor where eeprom driver initialisation (and EEPROM emulation initialisation) occurs to make it non-target-specific. (#12671)

* Add support for MCU = STM32F446 (#12619)

* Add support for MCU = STM32F446

* Update platforms/chibios/GENERIC_STM32_F446XE/configs/config.h

* Restore mcuconf.h to the one used by RT-STM32F446RE-NUCLEO64

* stm32f446: update mcuconf.h and board.h for 16MHz operation, with USB enabled, and other peripherals disabled.

* Format code according to conventions (#12682)

* Format code according to conventions (#12687)

* Add STM32L433 and L443 support (#12063)

* initial L433 commit

* change to XC

* fix L433

* disable all peripherals

* update system and peripheral clocks

* 433 change

* use its own board  files

* revert its own board files

* l433 specific change

* fix stm32l432xx define

* remove duplicate #define

* fix bootloader jump

* move to L443xx and add i2c2, spi2, usart3 to mcuconf.h

* move to L443

* move to L443

* fix sdmmc in mcuconf.h

* include STM32L443

* add L443

* Include L443 in compatible microcontrollers

* Include L443 in compatible microcontrollers

* Update config bootloader jump description

* Update ChibiOS define reasoning

* Update quantum/mcu_selection.mk

* fix git conflict

* Updated Function96 with V2 files and removed chconf.h and halconf.h (#12613)

* Fix bad PR merge for #6580. (#12721)

* Change RGB/LED Matrix to use a simple define for USB suspend (#12697)

* [CI] Format code according to conventions (#12731)

* Fixing transport's led/rgb matrix suspend state logic (#12770)

* [CI] Format code according to conventions (#12772)

* Fix comment parsing (#12750)

* Added OLED fade out support (#12086)

* fix some references to bin/qmk that slipped in (#12832)

* Resolve a number of warnings in `qmk generate-api` (#12833)

* New command: qmk console (#12828)

* stash poc

* stash

* tidy up implementation

* Tidy up slightly for review

* Tidy up slightly for review

* Bodge environment to make tests pass

* Refactor away from asyncio due to windows issues

* Filter devices

* align vid/pid printing

* Add hidapi to the installers

* start preparing for multiple hid_listeners

* udev rules for hid_listen

* refactor to move closer to end state

* very basic implementation of the threaded model

* refactor how vid/pid/index are supplied and parsed

* windows improvements

* read the report directly when usage page isn't available

* add per-device colors, the choice to show names or numbers, and refactor

* add timestamps

* Add support for showing bootloaders

* tweak the color for bootloaders

* Align bootloader disconnect with connect color

* add support for showing all bootloaders

* fix the pyusb check

* tweaks

* fix exception

* hide a stack trace behind -v

* add --no-bootloaders option

* add documentation for qmk console

* Apply suggestions from code review

* pyformat

* clean up and flesh out KNOWN_BOOTLOADERS

* Remove pointless SERIAL_LINK_ENABLE rules (#12846)

* Make Swap Hands use PROGMEM (#12284)

This converts the array that the Swap Hands feature uses to use PROGMEM,
and to read from that array, as such. Since this array never changes at
runtime, there is no reason to keep it in memory. Especially for AVR
boards, as memory is a precious resource.

* Fix another bin/qmk reference (#12856)

* [Keymap] Turn OLED off on suspend in soundmonster keymap (#10419)

* Fixup build errors on `develop` branch. (#12723)

* LED Matrix: Effects! (#12651)

* Fix syntax error when compiling for ARM (#12866)

* Remove KEYMAP and LAYOUT_kc (#12160)

* alias KEYMAP to LAYOUT

* remove KEYMAP and LAYOUT_kc

* Add setup, clone, and env to the list of commands we allow even with broken modules (#12868)

* Rename `point_t` -> `led_point_t` (#12864)

* [Keyboard] updated a vendor name / fixed minor keymap issues (#12881)

* Add missing LED Matrix suspend code to suspend.c (#12878)

* LED Matrix: Documentation (#12685)

* Deprecate `send_unicode_hex_string()` (#12602)

* Fix spelling mistake regarding LED Matrix in split_common. (#12888)

* [Keymap] Fix QWERTY/DVORAK status output for kzar keymap (#12895)

* Use milc.subcommand.config instead of qmk.cli.config (#12915)

* Use milc.subcommand.config instead

* pyformat

* remove the config test

* Add function to allow repeated blinking of one layer (#12237)

* Implement function rgblight_blink_layer_repeat to allow repeated blinking of one layer at a time

* Update doc

* Rework rgblight blinking according to requested change

* optimize storage

* Fixup housekeeping from being invoked twice per loop. (#12933)

* matrix: wait for row signal to go HIGH for every row (#12945)

I noticed this discrepancy (last row of the matrix treated differently than the
others) when optimizing the input latency of my keyboard controller, see also
https://michael.stapelberg.ch/posts/2021-05-08-keyboard-input-latency-qmk-kinesis/

Before this commit, when tuning the delays I noticed ghost key presses when
pressing the F2 key, which is on the last row of the keyboard matrix: the
dead_grave key, which is on the first row of the keyboard matrix, would be
incorrectly detected as pressed.

After this commit, all keyboard matrix rows are interpreted correctly.

I suspect that my setup is more susceptible to this nuance than others because I
use GPIO_INPUT_PIN_DELAY=0 and hence don’t have another delay that might mask
the problem.

* ensure we do not conflict with existing keymap aliases (#12976)

* Add support for up to 4 IS31FL3733 drivers (#12342)

* Convert Encoder callbacks to be boolean functions (#12805)

* [Keyboard] Fix Terrazzo build failure (#12977)

* Do not hard set config in CPTC files (#11864)

* [Keyboard] Corne - Remove legacy revision support (#12226)

* [Keymap] Update to Drashna keymap and user code (based on develop) (#12936)

* Add Full-duplex serial driver for ARM boards (#9842)

* Document LED_MATRIX_FRAMEBUFFER_EFFECTS (#12987)

* Backlight: add defines for default level and breathing state (#12560)

* Add dire message about LUFA mass storage bootloader (#13014)

* [Keyboard] Remove redundant legacy and common headers for crkbd (#13023)

Was causing compiler errors on some systems.

* Fix keyboards/keymaps for boolean encoder callback changes (#12985)

* `backlight.c`: include `eeprom.h` (#13024)

* Add changelog for 2021-05-29 Breaking Changes merge (#12939)

* Add ChangeLog for 2021-05-29 Breaking Changes Merge: initial version

* Add recent develop changes

* Sort recent develop changes

* Remove sections for ChibiOS changes per tzarc

No ChibiOS changes this round.

* Add and sort recent develop changes

* add notes about keyboard moves/deletions

* import changelog for PR 12172

Documents the change to BOOTMAGIC_ENABLE.

* update section headings

* re-sort changelog

* add additional note regarding Bootmagic changes

* remove changelog timestamp

* update dates in main Breaking Changes docs

* fix broken section anchors in previous changelogs

* add link to backlight/eeprom patch to changelog

* highlight some more changes

* link PRs from section headers

* Restore standard readme

* run: qmk cformat --core-only
2021-05-29 14:38:50 -07:00
Zach White
767089384f
Resolve a number of warnings in qmk generate-api (#12833) 2021-05-08 12:44:05 -07:00
Ilya Zhuravlev
5f4054e7b8 fix build 2021-03-03 11:13:23 -05:00
Ilya Zhuravlev
ce49d6f644 Merge remote-tracking branch 'qmk/master' into vial 2021-03-03 11:12:07 -05:00
Ryan
62f304a225
Remove DESCRIPTION, H-J (#11616) 2021-01-20 00:38:12 +11:00
Thorben
3bbc4c1b43
added idb60 (#1)
* added idb60

* add secure locking feature key combination
2021-01-11 16:12:50 -05:00
Thorben
50611bd814
[Keyboard] Fixes fox idb_60 keyboard (#10827)
* Fixed VIA keymap build warning on gcc 10.2.0, Fixed misleading LED function names, Fixed formatting

* Fix: Allow layer LED indicators to be overriden on the keymap level

* Implemented suggested change from led_set_kb callback to led_update_kb callback

* Apply suggestions from code review

Co-authored-by: Ryan <fauxpark@gmail.com>

* Update keyboards/idb/idb_60/idb_60.c

Co-authored-by: Drashna Jaelre <drashna@live.com>

Co-authored-by: Ryan <fauxpark@gmail.com>
Co-authored-by: Drashna Jaelre <drashna@live.com>
2020-11-25 09:10:42 -08:00
Drashna Jaelre
a3f1defcd4
[Keyboard] Fix function references IDB 60 (#10810)
Co-authored-by: Ryan <fauxpark@gmail.com>
Co-authored-by: Thorben <34752364+itspngu@users.noreply.github.com>
2020-10-31 23:15:26 +11:00
pngu
19bd8aa942
idb 60 Bugfixes / Preparations for Open Source Hardware (#8866)
* Added idb 60 keyboard

* fixed info.json

* implemented revievers' suggested changes

* fixed an error

* implemented revievers' suggestions

* further cleanup

* implemented suggested changes

* fixed errors

* checkout

* delete old files

* delete old files

* preparations for open source hardware files

* revert eager debounce mode to default

* fix indicator LEDs stuck in "on" mode, rename ESC LED to fn LED (rev 2 PCB will have another LED slot on the right shift FN key)

* cleanup

* cleanup

* lost+found lufa

* lost+found lufa

* lost+found lufa

* lost+found lufa

* lost+found lufa

* Update keyboards/idb/idb_60/keymaps/pngu/keymap.c

Co-Authored-By: Joel Challis <git@zvecr.com>

* Update idb_60.h

* Update idb_60.h

* made suggested changes

* Update keyboards/idb/idb_60/idb_60.h

Co-Authored-By: Joel Challis <git@zvecr.com>

Co-authored-by: root <root@DESKTOP-QQ80MAV.localdomain>
Co-authored-by: tbrandt <thorben.brandt@dg-cybersicherheit.de>
Co-authored-by: Joel Challis <git@zvecr.com>
2020-04-22 13:17:57 +01:00
James Young
9bbce7a231 [Keyboard] IDB 60: Configurator bugfix (#7851)
* info.json: use debug linting

Changes the white space, mostly.

* info.json: correct file structure

* readme.md: templating
2020-01-12 10:50:52 -08:00
pngu
af77912d2d [Keyboard] Changes to support latest release of VIA, moved files to "idb" folder in "keymaps" in preparation of adding more boards, made changes to LAYOUT_ macros (#7798)
* make vendor folder for idb keyboards

* set default debounce to eager_pk, clean up vendor/product ID

* refactoring for VIA

* made changes to support latest release of VIA, added default keymap that's in line with the most popular configuration

* Made suggested formatting changes

* rebase to get rid of lufa files

* removed idb_60.json that's only meant for via itself

* Update keyboards/idb/idb_60/keymaps/via/rules.mk

* Update keyboards/idb/idb_60/readme.md

* Update keyboards/idb/idb_60/readme.md

* Update keyboards/idb/idb_60/readme.md

* Update keyboards/idb/idb_60/rules.mk

* Update keyboards/idb/idb_60/config.h

* Update keyboards/idb/idb_60/readme.md

* made suggested formatting changes

* fixing lufa

* Update keyboards/idb/idb_60/rules.mk

* Update keyboards/idb/idb_60/config.h

* made suggested changes
2020-01-10 00:57:49 -08:00