* Add macros to extract parameters from keycode values
Implement both encoding and decoding for keycodes like TO(layer) or
LM(layer, mod) in one place, so that the decoding won't get out of sync
with the encoding.
While at it, fix some macros for creating keycode values that did not
apply the appropriate masks to parameters (and therefore could allow the
result to be out of range if a wrong parameter was passed).
* keymap_common: Use extraction macros for keycodes
* pointing_device_auto_mouse: Use extraction macros for keycodes
Fixes#18970.
* process_autocorrect: Use extraction macros for keycodes
* process_caps_word: Use extraction macros for keycodes
(Also fix a minor bug - SH_TG was not handled properly)
* process_leader: Use extraction macros for keycodes
(Technically the code is not 100% correct, because it always assumes
that the LT() or MT() action was a tap, but it's a separate issue that
already existed before the keycode changes.)
* process_unicode: Use extraction macros for keycodes
* process_unicodemap: Use extraction macros for keycodes
* Deprecate SECURE_* keycodes for QK_SECURE_*
* Update keycode process
* Update process_secure.c
* Apply suggestions from code review
Co-authored-by: Ryan <fauxpark@gmail.com>
Co-authored-by: Ryan <fauxpark@gmail.com>
* Add ARRAY_SIZE and CEILING utility macros
* Apply a coccinelle patch to use ARRAY_SIZE
* fix up some straggling items
* Fix 'make test:secure'
* Enhance ARRAY_SIZE macro to reject acting on pointers
The previous definition would not produce a diagnostic for
```
int *p;
size_t num_elem = ARRAY_SIZE(p)
```
but the new one will.
* explicitly get definition of ARRAY_SIZE
* Convert to ARRAY_SIZE when const is involved
The following spatch finds additional instances where the array is
const and the division is by the size of the type, not the size of
the first element:
```
@ rule5a using "empty.iso" @
type T;
const T[] E;
@@
- (sizeof(E)/sizeof(T))
+ ARRAY_SIZE(E)
@ rule6a using "empty.iso" @
type T;
const T[] E;
@@
- sizeof(E)/sizeof(T)
+ ARRAY_SIZE(E)
```
* New instances of ARRAY_SIZE added since initial spatch run
* Use `ARRAY_SIZE` in docs (found by grep)
* Manually use ARRAY_SIZE
hs_set is expected to be the same size as uint16_t, though it's made
of two 8-bit integers
* Just like char, sizeof(uint8_t) is guaranteed to be 1
This is at least true on any plausible system where qmk is actually used.
Per my understanding it's universally true, assuming that uint8_t exists:
https://stackoverflow.com/questions/48655310/can-i-assume-that-sizeofuint8-t-1
* Run qmk-format on core C files touched in this branch
Co-authored-by: Stefan Kerkmann <karlk90@pm.me>
* Fix Caps Word to treat mod-taps more consistently.
Previously, holding any mod-tap key while Caps Word is active stops Caps
Word, and this happens regardless of `caps_word_press_user()`. Yet for
regular mod keys, AltGr (KC_RALT) is ignored, Shift keys are passed to
`caps_word_press_user()` to determine whether to continue, and
similarly, a key `RSFT(KC_RALT)` representing Right Shift + Alt is
passed to `caps_word_press_user()` to determine whether to continue.
This commit makes held mod-tap keys consistent with regular mod keys:
* Holding a `RALT_T` mod-tap is ignored.
* When holding a shift mod-tap key, `KC_LSFT` or `KC_RSFT` is passed to
`caps_word_press_user()` to determine whether to continue.
* When holding a Right Shift + Alt (`RSA_T`) mod-tap, `RSFT(KC_RALT)` is
passed to `caps_word_press_user()`.
Particularly, with this fix a user may choose to continue Caps Word when
a shift mod-tap key is held by adding `KC_LSFT` and `KC_RSFT` cases in
`caps_word_press_user()`. For instance as
```
bool caps_word_press_user(uint16_t keycode) {
switch (keycode) {
// Keycodes that continue Caps Word, with shift applied.
case KC_A ... KC_Z:
case KC_MINS:
add_weak_mods(MOD_BIT(KC_LSFT)); // Apply shift to the next key.
return true;
// Keycodes that continue Caps Word, without shifting.
case KC_1 ... KC_0:
case KC_BSPC:
case KC_DEL:
case KC_UNDS:
case KC_LSFT: // <<< Added here.
case KC_RSFT:
return true;
default:
return false; // Deactivate Caps Word.
}
}
```
* Fix Caps Word to treat mod-taps more consistently.
Previously, holding any mod-tap key while Caps Word is active stops Caps
Word, and this happens regardless of `caps_word_press_user()`. Yet for
regular mod keys, AltGr (KC_RALT) is ignored, Shift keys are passed to
`caps_word_press_user()` to determine whether to continue, and
similarly, a key `RSFT(KC_RALT)` representing Right Shift + Alt is
passed to `caps_word_press_user()` to determine whether to continue.
This commit makes held mod-tap keys consistent with regular mod keys:
* Holding a `RALT_T` mod-tap is ignored.
* When holding a shift mod-tap key, `KC_LSFT` or `KC_RSFT` is passed to
`caps_word_press_user()` to determine whether to continue.
* When holding a Right Shift + Alt (`RSA_T`) mod-tap, `RSFT(KC_RALT)` is
passed to `caps_word_press_user()`.
Particularly, with this fix a user may choose to continue Caps Word when
a shift mod-tap key is held by adding `KC_LSFT` and `KC_RSFT` cases in
`caps_word_press_user()`. For instance as
```
bool caps_word_press_user(uint16_t keycode) {
switch (keycode) {
// Keycodes that continue Caps Word, with shift applied.
case KC_A ... KC_Z:
case KC_MINS:
add_weak_mods(MOD_BIT(KC_LSFT)); // Apply shift to the next key.
return true;
// Keycodes that continue Caps Word, without shifting.
case KC_1 ... KC_0:
case KC_BSPC:
case KC_DEL:
case KC_UNDS:
case KC_LSFT: // <<< Added here.
case KC_RSFT:
return true;
default:
return false; // Deactivate Caps Word.
}
}
```
* Update quantum/process_keycode/process_caps_word.c
Co-authored-by: Joel Challis <git@zvecr.com>
* Refactor steno into STENO_ENABLE_[ALL|GEMINI|BOLT]
* Update stenography documentation
* STENO_ENABLE_TXBOLT → STENO_ENABLE_BOLT
TXBOLT is a better name but BOLT is more consistent with the
pre-existing TX Bolt related constants, which all drop the "TX " prefix
* Comments
* STENO_ENABLE_[GEMINI|BOLT|ALL] → STENO_PROTOCOL = [geminipr|txbolt|all]
* Add note on lacking V-USB support
* Clear chord at the end of the switch(mode){send_steno_chord} block
* Return true if NOEVENT
* update_chord_xxx → add_xxx_key_to_chord
* Enable the defines for all the protocols if STENO_PROTOCOL = all
* Mention how to use `steno_set_mode`
* Set the default steno protocol to "all"
This is done so that existing keymaps invoking `steno_set_mode` don't
all suddenly break
* Add data driver equivalents for stenography feature
* Document format of serial steno packets
(Thanks dnaq)
* Add missing comma
* Fix Caps Word and Unicode Map
* Tests for Caps Word + Auto Shift and Unicode Map.
* Fix formatting
* Add additional keyboard report expectation macros
This commit defines five test utilities, EXPECT_REPORT, EXPECT_UNICODE,
EXPECT_EMPTY_REPORT, EXPECT_ANY_REPORT and EXPECT_NO_REPORT for use with
TestDriver.
EXPECT_REPORT sets a gmock expectation that a given keyboard report will
be sent. For instance,
EXPECT_REPORT(driver, (KC_LSFT, KC_A));
is shorthand for
EXPECT_CALL(driver,
send_keyboard_mock(KeyboardReport(KC_LSFT, KC_A)));
EXPECT_UNICODE sets a gmock expectation that a given Unicode code point
will be sent using UC_LNX input mode. For instance for U+2013,
EXPECT_UNICODE(driver, 0x2013);
expects the sequence of keys:
"Ctrl+Shift+U, 2, 0, 1, 3, space".
EXPECT_EMPTY_REPORT sets a gmock expectation that a given keyboard
report will be sent. For instance
EXPECT_EMPTY_REPORT(driver);
expects a single report without keypresses or modifiers.
EXPECT_ANY_REPORT sets a gmock expectation that a arbitrary keyboard
report will be sent, without matching its contents. For instance
EXPECT_ANY_REPORT(driver).Times(1);
expects a single arbitrary keyboard report will be sent.
EXPECT_NO_REPORT sets a gmock expectation that no keyboard report will
be sent at all.
* Add tap_key() and tap_keys() to TestFixture.
This commit adds a `tap_key(key)` method to TestFixture that taps a
given KeymapKey, optionally with a specified delay between press and
release.
Similarly, the method `tap_keys(key_a, key_b, key_c)` taps a sequence of
KeymapKeys.
* Use EXPECT_REPORT, tap_keys, etc. in most tests.
This commit uses EXPECT_REPORT, EXPECT_UNICODE, EXPECT_EMPTY_REPORT,
EXPECT_NO_REPORT, tap_key() and tap_keys() test utilities from the
previous two commits in most tests. Particularly the EXPECT_REPORT
macro is frequently useful and makes a nice reduction in boilerplate
needed to express many tests.
Co-authored-by: David Kosorin <david@kosorin.net>
This is a minor bug fix for Caps Word. Currently, Caps Word turns off
whenever a non-shift mod becomes active. This is done to avoid
interfering with hotkeys.
This commit makes an exception to continue Caps Word when AltGr (right
Alt) is held. Outside the US, the AltGr key is used to type additional
symbols (https://en.wikipedia.org/wiki/AltGr_key). Depending on the
language, these may include symbols used within words like accented
letters where it would be desirable to continue Caps Word.
* Add GET_TAPPING_TERM macro to reduce duplicate code
The macro gives the right tapping term depending on whether per-key
tapping terms and/or dynamic tapping terms are enabled. Unnecessary
function calls and variable resolution are avoided.
Fixes#16472.
* Use GET_TAPPING_TERM for Cirque trackpads
Co-authored-by: Stefan Kerkmann <karlk90@pm.me>
* Install dependencies before executing unit tests.
* Split out UTF-8 decoder.
* Fixup python formatting rules.
* Add documentation for QGF/QFF and the RLE format used.
* Add CLI commands for converting images and fonts.
* Add stub rules.mk for QP.
* Add stream type.
* Add base driver and comms interfaces.
* Add support for SPI, SPI+D/C comms drivers.
* Include <qp.h> when enabled.
* Add base support for SPI+D/C+RST panels, as well as concrete implementation of ST7789.
* Add support for GC9A01.
* Add support for ILI9341.
* Add support for ILI9163.
* Add support for SSD1351.
* Implement qp_setpixel, including pixdata buffer management.
* Implement qp_line.
* Implement qp_rect.
* Implement qp_circle.
* Implement qp_ellipse.
* Implement palette interpolation.
* Allow for streams to work with either flash or RAM.
* Image loading.
* Font loading.
* QGF palette loading.
* Progressive decoder of pixel data supporting Raw+RLE, 1-,2-,4-,8-bpp monochrome and palette-based images.
* Image drawing.
* Animations.
* Font rendering.
* Check against 256 colours, dump out the loaded palette if debugging enabled.
* Fix build.
* AVR is not the intended audience.
* `qmk format-c`
* Generation fix.
* First batch of docs.
* More docs and examples.
* Review comments.
* Public API documentation.
* Migrate Thermal Printer feature to UART driver
* Migrate 40percentclub UT47 to UART driver
* Migrate Centromere to UART driver
* Migrate Chimera Ergo to UART driver
* Migrate Chimera Let's Split to UART driver
* Migrate Chimera Ortho to UART driver
* Migrate Chimera Ortho Plus to UART driver
* Migrate Comet46 to UART driver
* Migrate Palm USB converter to UART driver
* Migrate Sun USB converter to UART driver
* Migrate Dichotomy to UART driver
* Migrate Honeycomb to UART driver
* Migrate Mitosis to UART driver
* Migrate Redox W to UART driver
* Migrate Uni660 to UART driver
* Migrate Telophase to UART driver
* New feature: `DYNAMIC_TAPPING_TERM_ENABLE`
3 new quantum keys to configure the tapping term on the fly.
* Replace sprintf call in tapping_term_report by get_u16_str
* Replace tab with 4 spaces
This also add support for specifying a LED pin to indicate haptic status,
and also adds support for a haptic-enable pin, which is useful to turn off
the boost converter on the solenoid driver.
