printer/voron-trident-350
1
0
Fork 0
Code Issues Pull Requests Actions Packages Projects Releases Wiki Activity

New backup from 02/11/25 - 20:26:49

Browse Source
This commit is contained in:
Voron Trident 350
2025-11-02 20:26:49 +00:00
parent 05a74a312f
commit 5dd6986385
8 changed files with 938 additions and 1 deletions
Download Patch File Download Diff File Expand all files Collapse all files

1
printer_data/config

Submodule printer_data/config deleted from a5803f34b3

7
printer_data/config/README.md Normal file
View File

@@ -0,0 +1,7 @@
# Voron Trident 350
Hardware:
* Raspberry Pi 3B
* BigTreeTech Octopus
* LDO Nighthawk 36
* Nevermore

45
printer_data/config/crowsnest.conf Normal file
View File

@@ -0,0 +1,45 @@
#### crowsnest.conf
#### This is the default config after installation.
#### It is also used as the default config in MainsailOS.
#### For details on how to configure this to your needs, see:
#### https://github.com/mainsail-crew/crowsnest/blob/master/README.md
#####################################################################
#### #####
#### Information about ports and according URL's #####
#### #####
#####################################################################
#### #####
#### Port 8080 equals /webcam/?action=[stream/snapshot] #####
#### Port 8081 equals /webcam2/?action=[stream/snapshot] #####
#### Port 8082 equals /webcam3/?action=[stream/snapshot] #####
#### Port 8083 equals /webcam4/?action=[stream/snapshot] #####
#### #####
#### Note: These ports are default for most Mainsail #####
#### installations. Using any other port would involve #####
#### changing the proxy configuration or using URLs #####
#### with the specific port like #####
#### http://<ip>:<port>/?action=[stream/snapshot] #####
#### #####
#####################################################################
#### RTSP Stream URL: ( if enabled and supported ) #####
#### rtsp://<ip>:<rtsp_port>/stream.h264 #####
#####################################################################
[crowsnest]
log_path: /home/printer/printer_data/logs/crowsnest.log
log_level: verbose # Valid Options are quiet/verbose/debug
delete_log: false # Deletes log on every restart, if set to true
no_proxy: false # If set to true, no reverse proxy is required. Only change this, if you know what you are doing.
[cam 1]
mode: ustreamer # ustreamer - Provides MJPG and snapshots. (All devices)
# camera-streamer - Provides WebRTC, MJPG and snapshots. (only RPiOS + RPi 0/1/2/3/4)
port: 8080 # HTTP/MJPG stream/snapshot port
device: /dev/video0 # See log for available devices
resolution: 640x480 # <width>x<height> format
max_fps: 15 # If hardware supports it, it will be forced, otherwise ignored/coerced.
#custom_flags: # You can run the stream services with custom flags.
#v4l2ctl: # Add v4l2-ctl parameters to setup your camera, see log for your camera capabilities.

46
printer_data/config/moonraker.conf Normal file
View File

@@ -0,0 +1,46 @@
[server]
host: 0.0.0.0
port: 7125
klippy_uds_address: /home/printer/printer_data/comms/klippy.sock
[authorization]
trusted_clients:
10.42.0.0/16
10.0.0.0/8
127.0.0.0/8
169.254.0.0/16
172.16.0.0/12
192.168.0.0/16
FC00::/7
FE80::/10
::1/128
cors_domains:
*.lan
*.local
*://localhost
*://localhost:*
*://my.mainsail.xyz
*://app.fluidd.xyz
[octoprint_compat]
[history]
[update_manager]
channel: dev
refresh_interval: 168
[update_manager mainsail]
path: /home/printer/mainsail
repo: mainsail-crew/mainsail
channel: stable
type: web
persistent_files:
config.json
[update_manager mainsail-config]
managed_services: klipper
origin: https://github.com/mainsail-crew/mainsail-config.git
path: /home/printer/mainsail-config
primary_branch: master
type: git_repo

129
printer_data/config/nitehawk-36.cfg Normal file
View File

@@ -0,0 +1,129 @@
# This file contains pin mappings for the LDO Nitehawk-36 Toolboard
# To use this config, the firmware should be compiled for the Raspberry Pi RP2040
# Make sure to include this config *at the end* of printer.cfg to overwrite the relevent sections
# See https://docs.ldomotors.com/en/Toolboard/nitehawk-36#firmware-setup-and-update
# For instructions on uploading/updating klipper firmware to the PCB
## LDO Nitehawk-SB Toolboard Partial Config
## *** THINGS TO CHANGE/CHECK: ***
## MCU paths [mcu] section
## Thermistor types [extruder] sections
## *MAKE SURE* to include this partial config file *AFTER* the main controller config.
## This will ensure the relavent sections are overwritten by the pin mappings specified here.
[mcu nhk]
## Obtain definition by "ls -l /dev/serial/by-id/" then unplug to verify
##--------------------------------------------------------------------
serial: /dev/serial/by-id/usb-Klipper_rp2040_4E363334320E22C6-if00
restart_method: command
##--------------------------------------------------------------------
#####################################################################
# Endstops
#####################################################################
## XES - Toolhead PCB
[stepper_x]
endstop_pin: nhk:gpio13
#####################################################################
# Filament Sensor
#####################################################################
#[filament_switch_sensor filament_sensor]
#switch_pin: nhk:gpio3
#pause_on_runout: True
#####################################################################
# Extruder
#####################################################################
[extruder]
step_pin: nhk:gpio23
dir_pin: nhk:gpio24
enable_pin: !nhk:gpio25
heater_pin: nhk:gpio9
sensor_pin: nhk:gpio29
pullup_resistor: 2200
[tmc2209 extruder]
sense_resistor: 0.100
uart_pin: nhk:gpio0
tx_pin: nhk:gpio1
interpolate: false
#run_current: #recommend setting it below 0.7A.
#####################################################################
# Fans
#####################################################################
## PCF
[fan]
pin: nhk:gpio6
## HEF
[heater_fan hotend_fan]
pin: nhk:gpio5
tachometer_pin: nhk:gpio16
tachometer_ppr: 2
#####################################################################
# Probe
#####################################################################
## Probe Port
[probe]
pin: nhk:gpio10
#####################################################################
# Lights
#####################################################################
##Stealthburner Headlights
[neopixel sb_leds]
pin: nhk:gpio7
chain_count: 3
color_order: GRBW
initial_RED: 0.0
initial_GREEN: 0.0
initial_BLUE: 1.0
initial_WHITE: 0.0
## PCB Activity Light
[output_pin act_led]
pin: !nhk:gpio8
#####################################################################
# Accelerometer
#####################################################################
[adxl345]
cs_pin: nhk:gpio27
spi_software_sclk_pin: nhk:gpio18
spi_software_mosi_pin: nhk:gpio20
spi_software_miso_pin: nhk:gpio19
[resonance_tester]
accel_chip: adxl345
accel_per_hz: 100
sweeping_accel: 400
sweeping_period: 0
##--------------------------------------------------------------------
## Uncomment below for 250mm build
#probe_points:
# 125, 125, 20
## Uncomment below for 300mm build
#probe_points:
# 155, 155, 20
## Uncomment below for 350mm build
#probe_points:
# 175, 175, 20
#####################################################################
# Addtional Sensors
#####################################################################
[temperature_sensor NH36]
sensor_type: temperature_mcu
sensor_mcu: nhk
min_temp: 0
max_temp: 100

150
printer_data/config/nitehawk-sb.cfg Normal file
View File

@@ -0,0 +1,150 @@
# This file contains pin mappings for the LDO Nitehawk-SB Toolboard
# To use this config, the firmware should be compiled for the Raspberry Pi RP2040
# Make sure to include this config *at the end* of printer.cfg to overwrite the relevent sections
# See https://docs.ldomotors.com/en/voron/nitehawk-sb#firmware-setup-and-update
# For instructions on uploading/updating klipper firmware to the PCB
## LDO Nitehawk-SB Toolboard Partial Config
## *** THINGS TO CHANGE/CHECK: ***
## MCU paths [mcu] section
## Thermistor types [extruder] sections
## *MAKE SURE* to include this partial config file *AFTER* the main controller config.
## This will ensure the relavent sections are overwritten by the pin mappings specified here.
[mcu nhk]
## Obtain definition by "ls -l /dev/serial/by-id/" then unplug to verify
##--------------------------------------------------------------------
serial: /dev/serial/by-id/usb-Klipper_rp2040_4E363334320E22C6-if00
restart_method: command
##--------------------------------------------------------------------
#####################################################################
# Endstops
#####################################################################
## XES - Toolhead PCB
[stepper_x]
endstop_pin: nhk:gpio13
## YES - Toolhead PCB
[stepper_y]
endstop_pin: nhk:gpio12
#####################################################################
# Extruder
#####################################################################
[extruder]
step_pin: nhk:gpio23
dir_pin: nhk:gpio24
enable_pin: !nhk:gpio25
heater_pin: nhk:gpio9
sensor_pin: nhk:gpio29
pullup_resistor: 2200
[tmc2209 extruder]
sense_resistor: 0.100
uart_pin: nhk:gpio0
tx_pin: nhk:gpio1
interpolate: false
#run_current: #recommend setting it below 0.7A.
#####################################################################
# Fans
#####################################################################
## PCF
[fan]
pin: nhk:gpio6
#tachometer_pin: nhk:gpio17
#tachometer_ppr: 2
## HEF
[heater_fan hotend_fan]
pin: nhk:gpio5
tachometer_pin: nhk:gpio16
tachometer_ppr: 2
#####################################################################
# Probe
#####################################################################
## Probe Port
#[probe]
#pin: nhk:gpio10
#####################################################################
# Lights
#####################################################################
##Stealthburner Headlights
[neopixel sb_leds]
pin: nhk:gpio7
chain_count: 3
color_order: GRBW
initial_RED: 0.0
initial_GREEN: 0.0
initial_BLUE: 1.0
initial_WHITE: 0.0
## PCB Activity Light
[output_pin act_led]
pin: !nhk:gpio8
#####################################################################
# Accelerometer
#####################################################################
[adxl345]
cs_pin: nhk:gpio21
spi_software_sclk_pin: nhk:gpio18
spi_software_mosi_pin: nhk:gpio20
spi_software_miso_pin: nhk:gpio19
[resonance_tester]
accel_chip: adxl345
accel_per_hz: 100
sweeping_accel: 400
sweeping_period: 0
##--------------------------------------------------------------------
## Uncomment below for 250mm build
#probe_points:
# 125, 125, 20
## Uncomment below for 300mm build
#probe_points:
# 155, 155, 20
## Uncomment below for 350mm build
#probe_points:
# 175, 175, 20
##--------------------------------------------------------------------
#####################################################################
# Thermistors
# #####################################################################
## External Chamber Thermistor Port
[temperature_sensor chamber_temp]
sensor_type: Generic 3950
sensor_pin: nhk:gpio28
min_temp: 0
max_temp: 100
gcode_id: chamber_th
[thermistor CMFB103F3950FANT]
temperature1: 0.0
resistance1: 32116.0
temperature2: 40.0
resistance2: 5309.0
temperature3: 80.0
resistance3: 1228.0
[temperature_sensor nh_temp]
## Nitehawk PCB Sensor
sensor_type: CMFB103F3950FANT
sensor_pin: nhk:gpio26
pullup_resistor: 2200
min_temp: 0
max_temp: 100
gcode_id: nh_th

550
printer_data/config/printer.cfg Normal file
View File

@@ -0,0 +1,550 @@
[include mainsail.cfg]
# This file contains common pin mappings for the BigTreeTech Octopus V1.
# To use this config, the firmware should be compiled for the STM32F446 with a "32KiB bootloader"
# Enable "extra low-level configuration options" and select the "12MHz crystal" as clock reference
# after running "make", copy the generated "klipper/out/klipper.bin" file to a
# file named "firmware.bin" on an SD card and then restart the OctoPus with that SD card.
# See docs/Config_Reference.md for a description of parameters.
## Voron Design Trident 250/300/350mm BigTreeTech OctoPus V1 TMC2209 UART config
## *** THINGS TO CHANGE/CHECK: ***
## MCU paths [mcu] section
## Thermistor types [extruder] and [heater_bed] sections - See https://www.klipper3d.org/Config_Reference.html#common-thermistors for common thermistor types
## Hotend heater pin [extruder] section
## Leadscrew Rotation Distance [stepper_z], [stepper_z1], [stepper_z2]
## Z Endstop Switch location [safe_z_home] section
## Z Endstop Switch offset for Z0 [stepper_z] section
## Stepper Z1 enable pin [stepper_z1] section
## PID tune [extruder] and [heater_bed] sections
## Probe pin [probe] section
## Fine tune E steps [extruder] section
[mcu]
## Obtain definition by "ls -l /dev/serial/by-id/" then unplug to verify
##--------------------------------------------------------------------
serial: /dev/serial/by-id/usb-Klipper_stm32f446xx_370048001150535556323420-if00
restart_method: command
##--------------------------------------------------------------------
[include nighthawk-36.cfg]
[printer]
kinematics: corexy
max_velocity: 300
max_accel: 3000 #Max 4000
max_z_velocity: 15 #Max 15 for 12V TMC Drivers, can increase for 24V
max_z_accel: 350
square_corner_velocity: 5.0
#####################################################################
# X/Y Stepper Settings
#####################################################################
## B Stepper - Left
## Connected to MOTOR_0
## Endstop connected to DIAG_0
[stepper_x]
step_pin: PF13
dir_pin: !PF12
enable_pin: !PF14
rotation_distance: 40
microsteps: 32
full_steps_per_rotation:200 #set to 400 for 0.9 degree stepper
endstop_pin: PG6
position_min: 0
##--------------------------------------------------------------------
## Uncomment below for 250mm build
#position_endstop: 250
#position_max: 250
## Uncomment for 300mm build
#position_endstop: 300
#position_max: 300
## Uncomment for 350mm build
position_endstop: 350
position_max: 350
##--------------------------------------------------------------------
homing_speed: 25 #Max 100
homing_retract_dist: 5
homing_positive_dir: true
## Make sure to update below for your relevant driver (2208 or 2209)
[tmc2209 stepper_x]
uart_pin: PC4
interpolate: False
run_current: 0.8
sense_resistor: 0.110
stealthchop_threshold: 0
## A Stepper - Right
## Connected to MOTOR_1
## Endstop connected to DIAG_1
[stepper_y]
step_pin: PG0
dir_pin: !PG1
enable_pin: !PF15
rotation_distance: 40
microsteps: 32
full_steps_per_rotation:200 #set to 400 for 0.9 degree stepper
endstop_pin: PG9
position_min: 0
##--------------------------------------------------------------------
## Uncomment for 250mm build
#position_endstop: 250
#position_max: 250
## Uncomment for 300mm build
#position_endstop: 300
#position_max: 300
## Uncomment for 350mm build
position_endstop: 350
position_max: 350
##--------------------------------------------------------------------
homing_speed: 25 #Max 100
homing_retract_dist: 5
homing_positive_dir: true
## Make sure to update below for your relevant driver (2208 or 2209)
[tmc2209 stepper_y]
uart_pin: PD11
interpolate: False
run_current: 0.8
sense_resistor: 0.110
stealthchop_threshold: 0
#####################################################################
# Z Stepper Settings
#####################################################################
## Z0 Stepper - Front Left
## Connected to MOTOR_2
## Endstop connected to DIAG_2
[stepper_z]
step_pin: PF11
dir_pin: PG3
enable_pin: !PG5
# Rotation Distance for TR8x8 = 8, TR8x4 = 4, TR8x2 = 2
rotation_distance: 8
microsteps: 32
endstop_pin: PG10
## Z-position of nozzle (in mm) to z-endstop trigger point relative to print surface (Z0)
## (+) value = endstop above Z0, (-) value = endstop below
## Increasing position_endstop brings nozzle closer to the bed
## After you run Z_ENDSTOP_CALIBRATE, position_endstop will be stored at the very end of your config
position_endstop: -0.5
## All builds use same Max Z
position_max: 250
position_min: -2.5
homing_speed: 8.0 # Leadscrews are slower than 2.4, 10 is a recommended max.
second_homing_speed: 3
homing_retract_dist: 3
## Make sure to update below for your relevant driver (2208 or 2209)
[tmc2209 stepper_z]
uart_pin: PC6
interpolate: False
run_current: 0.6
sense_resistor: 0.110
stealthchop_threshold: 0
## Z1 Stepper - Rear Center
## Connected to MOTOR_3
[stepper_z1]
step_pin: PG4
dir_pin: PC1
## Octopus 1.0 & 1.1. Octopus PRO 1.0
enable_pin: !PA0
## Octopus PRO 1.1
#enable_pin: !PA2
# Rotation Distance for TR8x8 = 8, TR8x4 = 4, TR8x2 = 2
rotation_distance: 8
microsteps: 32
## Make sure to update below for your relevant driver (2208 or 2209)
[tmc2209 stepper_z1]
uart_pin: PC7
interpolate: False
run_current: 0.6
sense_resistor: 0.110
stealthchop_threshold: 0
## Z2 Stepper - Front Right
## Connected to MOTOR_4
[stepper_z2]
step_pin: PF9
dir_pin: PF10
enable_pin: !PG2
# Rotation Distance for TR8x8 = 8, TR8x4 = 4, TR8x2 = 2
rotation_distance: 8
microsteps: 32
## Make sure to update below for your relevant driver (2208 or 2209)
[tmc2209 stepper_z2]
uart_pin: PF2
interpolate: False
run_current: 0.6
sense_resistor: 0.110
stealthchop_threshold: 0
#####################################################################
# Extruder
#####################################################################
# Connected to MOTOR_6
# Heater - HE0
# Thermistor - T0
#[extruder]
#step_pin: PE2
#dir_pin: PE3
#enable_pin: !PD4
### Update value below when you perform extruder calibration
### If you ask for 100mm of filament, but in reality it is 98mm:
### rotation_distance = <previous_rotation_distance> * <actual_extrude_distance> / 100
### 22.6789511 is a good starting point
#rotation_distance: 22.6789511 #Bondtech 5mm Drive Gears
### Update Gear Ratio depending on your Extruder Type
### Use 50:10 for Stealthburner/Clockwork 2
### Use 50:17 for Afterburner/Clockwork (BMG Gear Ratio)
### Use 80:20 for M4, M3.1
#gear_ratio: 50:10
#microsteps: 32
#full_steps_per_rotation: 200 #200 for 1.8 degree, 400 for 0.9 degree
#nozzle_diameter: 0.400
#filament_diameter: 1.75
### Octopus 1.0 & 1.1. Octopus PRO 1.0
##heater_pin: PA2
### Octopus PRO 1.1
##heater_pin: PA0
### Check what thermistor type you have. See https://www.klipper3d.org/Config_Reference.html#common-thermistors for common thermistor types.
### Use "Generic 3950" for NTC 100k 3950 thermistors
##sensor_type:
#sensor_pin: PF4
#min_temp: 10
#max_temp: 270
#max_power: 1.0
#min_extrude_temp: 170
#control = pid
#pid_kp = 26.213
#pid_ki = 1.304
#pid_kd = 131.721
### Try to keep pressure_advance below 1.0
##pressure_advance: 0.05
### Default is 0.040, leave stock
##pressure_advance_smooth_time: 0.040
#
### E0 on MOTOR6
### Make sure to update below for your relevant driver (2208 or 2209)
#[tmc2209 extruder]
#uart_pin: PE1
#interpolate: false
#run_current: 0.5
#sense_resistor: 0.110
#stealthchop_threshold: 0
#####################################################################
# Bed Heater
#####################################################################
[heater_bed]
## SSR Pin - HE1
## Thermistor - TB
heater_pin: PA3
## Check what thermistor type you have. See https://www.klipper3d.org/Config_Reference.html#common-thermistors for common thermistor types.
## Use "Generic 3950" for Keenovo heaters
sensor_type: Generic 3950
sensor_pin: PF3
## Adjust max_power so it doesn't exceed the SSR rating. The Omron G3NA-210B-DC5 SSR is rated at 4 amps without a heatsink.
## The formula is "4 / (Wattage_of_bed_heater / Mains_voltage) = max_power"
## If max_power is greater than 1.0, use 1.0
max_power: 0.6
min_temp: 0
max_temp: 120
control: pid
pid_kp: 58.437
pid_ki: 2.347
pid_kd: 363.769
#####################################################################
# Probe
#####################################################################
#[probe]
### Inductive Probe
### This probe is not used for Z height, only Quad Gantry Leveling
#
## Select the probe port by type:
### For the PROBE port. Will not work with Diode. May need pull-up resistor from signal to 24V.
##pin: ~!PB7
### For the DIAG_7 port. NEEDS BAT85 DIODE! Change to !PG15 if probe is NO.
##pin: PG15
### For Octopus Pro Probe port; NPN and PNP proximity switch types can be set by jumper
##pin: ~!PC5
#
##--------------------------------------------------------------------
#
#x_offset: 0
#y_offset: 25.0
#z_offset: 0
#speed: 10.0
#samples: 3
#samples_result: median
#sample_retract_dist: 3.0
#samples_tolerance: 0.006
#samples_tolerance_retries: 3
#####################################################################
# Fan Control
#####################################################################
#[fan]
### Print Cooling Fan - FAN0
#pin: PA8
#kick_start_time: 0.5
### Depending on your fan, you may need to increase this value
### if your fan will not start. Can change cycle_time (increase)
### if your fan is not able to slow down effectively
#off_below: 0.10
#[heater_fan hotend_fan]
### Hotend Fan - FAN1
#pin: PE5
#max_power: 1.0
#kick_start_time: 0.5
#heater: extruder
#heater_temp: 50.0
### If you are experiencing back flow, you can reduce fan_speed
##fan_speed: 1.0
[controller_fan controller_fan]
## Controller fan - FAN2
pin: PD12
kick_start_time: 0.5
heater: heater_bed
#[heater_fan exhaust_fan]
## Exhaust fan - FAN3
#pin: PD13
#max_power: 1.0
#shutdown_speed: 0.0
#kick_start_time: 5.0
#heater: heater_bed
#heater_temp: 60
#fan_speed: 1.0
#####################################################################
# LED Control
#####################################################################
#[output_pin caselight]
# Chamber Lighting - HE2 Connector (Optional)
##Octopus 1.0 & 1.1, Octopus PRO 1.0
#pin: PB10
##Octopus PRO 1.1
#pin: PB0
#pwm:true
#shutdown_value: 0
#value:1
#cycle_time: 0.01
#####################################################################
# Homing and Gantry Adjustment Routines
#####################################################################
[idle_timeout]
timeout: 1800
[safe_z_home]
## XY Location of the Z Endstop Switch
## Update -10,-10 to the XY coordinates of your endstop pin
## (such as 157,305) after going through Z Endstop Pin
## Location Definition step.
home_xy_position:-10,-10
speed:100
z_hop:10
[z_tilt]
## Use Z_TILT_ADJUST to level the bed .
## z_positions: Location of toolhead
##--------------------------------------------------------------------
## Uncomment below for 250mm build
#z_positions:
# -50, 18
# 125, 298
# 300, 18
#points:
# 30, 5
# 125, 195
# 220, 5
## Uncomment below for 300mm build
#z_positions:
# -50, 18
# 150, 348
# 350, 18
#points:
# 30, 5
# 150, 245
# 270, 5
## Uncomment below for 350mm build
z_positions:
-50, 18
175, 398
400, 18
points:
30, 5
175, 295
320, 5
##--------------------------------------------------------------------
speed: 200
horizontal_move_z: 10
retries: 5
retry_tolerance: 0.0075
########################################
# EXP1 / EXP2 (display) pins
########################################
[board_pins]
aliases:
# EXP1 header
EXP1_1=PE8, EXP1_2=PE7,
EXP1_3=PE9, EXP1_4=PE10,
EXP1_5=PE12, EXP1_6=PE13, # Slot in the socket on this side
EXP1_7=PE14, EXP1_8=PE15,
EXP1_9=<GND>, EXP1_10=<5V>,
# EXP2 header
EXP2_1=PA6, EXP2_2=PA5,
EXP2_3=PB1, EXP2_4=PA4,
EXP2_5=PB2, EXP2_6=PA7, # Slot in the socket on this side
EXP2_7=PC15, EXP2_8=<RST>,
EXP2_9=<GND>, EXP2_10=<5V>
#####################################################################
# Displays
#####################################################################
## Uncomment the display that you have
#--------------------------------------------------------------------
#[display]
## RepRapDiscount 128x64 Full Graphic Smart Controller
#lcd_type: st7920
#cs_pin: EXP1_4
#sclk_pin: EXP1_5
#sid_pin: EXP1_3
#menu_timeout: 40
#encoder_pins: ^EXP2_5, ^EXP2_3
#click_pin: ^!EXP1_2
#[output_pin beeper]
#pin: EXP1_1
#--------------------------------------------------------------------
#[display]
## mini12864 LCD Display
lcd_type: uc1701
cs_pin: EXP1_3
a0_pin: EXP1_4
rst_pin: EXP1_5
encoder_pins: ^EXP2_5, ^EXP2_3
click_pin: ^!EXP1_2
contrast: 63
spi_software_miso_pin: EXP2_1
spi_software_mosi_pin: EXP2_6
spi_software_sclk_pin: EXP2_2
#[neopixel btt_mini12864]
## To control Neopixel RGB in mini12864 display
#pin: EXP1_6
#chain_count: 3
#initial_RED: 0.1
#initial_GREEN: 0.5
#initial_BLUE: 0.0
#color_order: RGB
## Set RGB values on boot up for each Neopixel.
## Index 1 = display, Index 2 and 3 = Knob
#[delayed_gcode setdisplayneopixel]
#initial_duration: 1
#gcode:
# SET_LED LED=btt_mini12864 RED=1 GREEN=1 BLUE=1 INDEX=1 TRANSMIT=0
# SET_LED LED=btt_mini12864 RED=1 GREEN=0 BLUE=0 INDEX=2 TRANSMIT=0
# SET_LED LED=btt_mini12864 RED=1 GREEN=0 BLUE=0 INDEX=3
#--------------------------------------------------------------------
#####################################################################
# Macros
#####################################################################
[gcode_macro PRINT_START]
# Use PRINT_START for the slicer starting script - PLEASE CUSTOMISE THE SCRIPT
gcode:
M117 Homing... ; display message
G28
Z_TILT_ADJUST
G28
## Uncomment for for your size printer:
#--------------------------------------------------------------------
## Uncomment for 250mm build
#G0 X125 Y125 Z30 F3600
## Uncomment for 300 build
#G0 X150 Y150 Z30 F3600
## Uncomment for 350mm build
G0 X175 Y175 Z30 F3600
#--------------------------------------------------------------------
[gcode_macro PRINT_END]
# Use PRINT_END for the slicer ending script - please customise for your slicer of choice
gcode:
# safe anti-stringing move coords
{% set th = printer.toolhead %}
{% set x_safe = th.position.x + 20 * (1 if th.axis_maximum.x - th.position.x > 20 else -1) %}
{% set y_safe = th.position.y + 20 * (1 if th.axis_maximum.y - th.position.y > 20 else -1) %}
{% set z_safe = [th.position.z + 2, th.axis_maximum.z]|min %}
SAVE_GCODE_STATE NAME=STATE_PRINT_END
M400 ; wait for buffer to clear
G92 E0 ; zero the extruder
G1 E-2.0 F3600 ; retract filament
TURN_OFF_HEATERS
G90 ; absolute positioning
G0 X{x_safe} Y{y_safe} Z{z_safe} F20000 ; move nozzle to remove stringing
G0 X{th.axis_maximum.x//2} Y{th.axis_maximum.y - 2} F3600 ; park nozzle at rear
M107 ; turn off fan
BED_MESH_CLEAR
# The purpose of the SAVE_GCODE_STATE/RESTORE_GCODE_STATE
# command pair is to restore the printer's coordinate system
# and speed settings since the commands above change them.
# However, to prevent any accidental, unintentional toolhead
# moves when restoring the state, explicitly set MOVE=0.
RESTORE_GCODE_STATE NAME=STATE_PRINT_END MOVE=0

11
printer_data/config/printer.cfg.dist Normal file
View File

@@ -0,0 +1,11 @@
[mcu]
serial: /dev/serial/by-id/<your-mcu-id>
[virtual_sdcard]
path: /home/printer/printer_data/gcodes
on_error_gcode: CANCEL_PRINT
[printer]
kinematics: none
max_velocity: 1000
max_accel: 1000