New backup from 02/11/25 - 20:26:49

2025-11-02 20:26:49 +00:00
parent 05a74a312f
commit 5dd6986385
8 changed files with 938 additions and 1 deletions
--- a/printer_data/config/crowsnest.conf
+++ b/printer_data/config/crowsnest.conf
@@ -0,0 +1,45 @@
+#### crowsnest.conf
+#### This is the default config after installation.
+#### It is also used as the default config in MainsailOS.
+#### For details on how to configure this to your needs, see:
+#### https://github.com/mainsail-crew/crowsnest/blob/master/README.md
+
+
+#####################################################################
+####                                                            #####
+####      Information about ports and according URL's           #####
+####                                                            #####
+#####################################################################
+####                                                            #####
+####    Port 8080 equals /webcam/?action=[stream/snapshot]      #####
+####    Port 8081 equals /webcam2/?action=[stream/snapshot]     #####
+####    Port 8082 equals /webcam3/?action=[stream/snapshot]     #####
+####    Port 8083 equals /webcam4/?action=[stream/snapshot]     #####
+####                                                            #####
+####    Note: These ports are default for most Mainsail         #####
+####    installations. Using any other port would involve       #####
+####    changing the proxy configuration or using URLs          #####
+####    with the specific port like                             #####
+####    http://<ip>:<port>/?action=[stream/snapshot]            #####
+####                                                            #####
+#####################################################################
+####    RTSP Stream URL: ( if enabled and supported )           #####
+####    rtsp://<ip>:<rtsp_port>/stream.h264                     #####
+#####################################################################
+
+
+[crowsnest]
+log_path: /home/printer/printer_data/logs/crowsnest.log
+log_level: verbose                      # Valid Options are quiet/verbose/debug
+delete_log: false                       # Deletes log on every restart, if set to true
+no_proxy: false                         # If set to true, no reverse proxy is required. Only change this, if you know what you are doing.
+
+[cam 1]
+mode: ustreamer                         # ustreamer - Provides MJPG and snapshots. (All devices)
+                                        # camera-streamer - Provides WebRTC, MJPG and snapshots. (only RPiOS + RPi 0/1/2/3/4)
+port: 8080                              # HTTP/MJPG stream/snapshot port
+device: /dev/video0                     # See log for available devices
+resolution: 640x480                     # <width>x<height> format
+max_fps: 15                             # If hardware supports it, it will be forced, otherwise ignored/coerced.
+#custom_flags:                          # You can run the stream services with custom flags.
+#v4l2ctl:                               # Add v4l2-ctl parameters to setup your camera, see log for your camera capabilities.